3M FoamFast 74 Spray Adhesive 500 ml

3M FoamFast 74 Spray Adhesive is an industrial grade spray adhesive featuring an extremely fast setting for bonding foams and fabrics. Used for bonding elastic latex or urethane foams to each other and together with other materials such as wood, metal and plastics. It is characterized by high coverage, smooth fixing lines and immediate adhesion. Not recommended for fixing vinyl. It is a very high tack adhesive suitable for foams, foams and padded items. Main features of spray glue 74 Fast adhesion with tear resistance, exact dispensing control, no dispersion, adherence to metal, adjustable dispensing, permanently glues fabrics, upholstery and foams, suitable for fixing upholstery. Features Soft lines of fastening Quick adhesion and tear resistance Width adjustable band spray for precision applications Ideal for bonding foams, sponge gums, fabrics, felt, cork or glass wool to other materials such as wood, metals or plastics It offers a holding time ranging from 15 seconds to 30 minutes Instructions for Use: 1. Make sure that the surfaces to be bonded are clean, dry and free of contaminants before applying the adhesive. 2. Select the required band width by rotating the nozzle and positioning it between the area indicated on the plastic crown by Le H (L = approximately 2 cm - H = approximately 7 cm) and point the spray nozzle in the direction of the area to be adhesivize. 3. Shake the container for about 5-10 seconds before use. 4. Keep the can about 12-18 cm from the surface to be adhesive. If the distance is increased by more than 20 cm, the spray band will tend to narrow. 5. For a homogeneous application, press the nozzle completely. 6. Apply a single layer of adhesive to the surfaces, allow to dry slightly for about 10-30 sec. and only then join the parts. 7. For edge rounding operations (pinching), gluing can be done up to 10 minutes after applying the adhesive. 8. To prevent clogging of the nozzle, it is recommended at the end of the work to purge the cylinder by turning it upside down and pressing the nozzle until the jet is free from adhesive.