3M VHB translucent double-sided transfer tape 9473PC 7 mm x 55 m x 0.25 mm

3M™ 9473PC transfer adhesive tape is a high-performance product ideal for industrial joining and metal fabrication. The transparent tape offers high holding power and cut resistance. High performance tape designed for applications requiring high cut resistance and bond strength ideal for industrial splicing and metal fabrication. Features Strong and durable bonds to a wide variety of substrates, including glass, metals, polyimide, rigid PVC, acrylic, polycarbonate and polystyrene Short-term temperature tolerance up to 260 °C for 1 hour Use temperature tolerance up to 149 °C Excellent chemical, UV and solvent resistance Designed for indoor and outdoor use Aerospace, white goods, automotive, printed circuit board fasteners, electronic elements, flexible circuit board and heater fasteners, general industrial assembly, panel mounting, industrial and metal elements, nameplates, solar installations, transportation Thicker version of F9469PC Class A-10 is a very rigid acrylic adhesive system. Its main characteristics are very high final adhesion, excellent temperature and solvent resistance, and high shear strength. Solvent resistance Laminated between two materials, these adhesive tapes can resist weak acids and alkalis, many oils, greases, petrol, paraffin, JP-4 fuel, hydraulic fluids, other aromatic, aliphatic and ketone hydrocarbons. Water resistance Laminated between two matarials and immersed for 100 hours in water at 20 °C, no deterioration of the adhesive occurs. Application techniques 1. Adhesion strength depends on the contact surface. Adequate application pressure ensures optimal adhesion. 2. For best adhesion, the surfaces to be assembled must be clean, dry and homogenous. Typical solvents that can be used are a 1:1 mixture of isopropyl alcohol and water, or heptane. Strictly observe the precautions for the use of solvents. 3. Apply the tape at temperatures between 20 °C. Applications at temperatures below 10 °C are not recommended as the adhesive becomes too rigid. rigid. Low temperatures are irrelevant after application. 4. In some cases, the fixing time can be accelerated by heating the surfaces to about 65 °C for 1 hour. This results in a better application of the adhesive onto the substrate. General information 1. The A-10 transfer tapes are designed for applications requiring high shear and peel strength. 2. The data given in these bulletins are average values derived from standard test methods and are not suitable for 2. The data given in these bulletins are average values from standard test methods and cannot be used for specification purposes.